water stains on varnished plywood

I restored my dinghy some years ago and the one thing I would have liked to have done was to remove the water stains under the varnish. The wood is sound but does have staining which somewhat spoils the look of the boat. I know I could paint it but does anyone know of a method of removing the staining?

Try sanding the area down to the bare wood. Sand till the stain is removed and put a new coat of varnish on the area.
Pete

PuffinInTegel's picture

If light sanding doesn't produce a natural colour (remember the top ply is quite thin - easy to sand right through inadvertently), try finding a coloured wood stain that matches the surrounding wood and then varnish over.
My boat has some discoloured patches that are unfixable, some patches of ply that don't match and I simply regard these as being the patina of more than 30 years' use.
Hope you are successful.
Gernot H.

I think you are right about patina, I'd prefer to have this than paint. The suggestion to sand the wood is OK but when I restored the boat I tried this and although there was some improvement I didn't want to sand any deeper as the wood isn't that thick and I felt it would be weakened.
I think for now I'll leave it as it is.
I asked the question to find out if anyone had used some form of bleaching solution to lighten the stains.

curlew's picture

The standard way to remove stains caused by damp on wood is to use oxalic acid, which I can buy at a good paint shop.