towing advice

hello, everytime I tow the boat it always seems to cause some bit of it to need repair from being bounced and shaken about. I 've got a combi road base trolley from trident uk, I strap it down in the middle and then tie the painter around the centre board slot and then forward on to the trolley, then strap the trolley to the trailer. Anybody any tips?
cheers David

Sorry I can't help you. I car top carry my Mirror and don't trailer it. Hopefully someone with towing experience will give you some good advice.
Pete

thanks for reply mirrorpete, just another quick question whats the best diameter and length of the rope that pulls up the gaff? The one I've got at the moment is very thick. cheers david

I think the diameter is not the critical thing. You want a line that does not stretch. The line that I have to raise my gaff is about 1/4" thick. But it is made of a material (sorry don't know what it is) and braided in such a way to minimize stretch. I bought it from John McCulloch who is a fellow sailor in the Ontario Mirror Dinghy Association, and sells Mirror Dinghy Supplies.

Click on the following to find parts for Mirror Dinghies. http://forum.mirrordiscussforum.org/node/17

No stretch to get it close to the mast as possible? The reason I ask is that the boom seemed very low when I went for a sail last Thursday, cheers david

I put a concave cut in the bottom of my gaff so that when it is raised it is as tight and parallel to the mast as possible. If you have the top of the mainsail tied close to the top of the gaff, your boom should be roughly parallel to the gunnels and not too low. How low is low, often is dependent on how tall the skipper and his crew are. I do not recall seeing a boom with a back end higher or at least not much higher than where the boom is attached to the mast. (sorry I don't remember all the technical terms for the parts of a boat and its parts.

Pete

many thanks mirror pete i'll ley you know how I get on. cheers david

beermatt's picture

Hi David

I tow my Mirror for about 200 miles at a time over speed bumps and all sorts, never had anything damaged in transit yet. What sort of things are you referring to breaking? Might be on a case by case basis.

I'm no expert but this is how I do it:

- Ratchet strap tight round the middle. Painter to tie the bow down.
- I tow it with the cover on, mast down.
- The mast, gaff, and boom run centrally down the boat, tied together in the middle. The mast is fractionally too long to fit so it's raised up over the transom slightly (makes the cover more aerodynamic at the back too).
- Light dinghy trailers don't have suspension so all the bumps in the road are absorbed by nothing more than the tyres (and flexing of the frame/fiberglass). For this reason I put all the heavy stuff in the car, and the light stuff (foils, sails, coats, buoyancy aids, etc) in the dinghy.
- Anything that isn't soft (including where the mast/gaff/boom are in contact the deck) i rest on an old rag (sheets, towells, etc) or rubber mat to prevent it scratching the deck and absorb the bouncing a bit.

Hope this helps.

Cheers

Matt

62816inBerlin's picture

I car-top too, as can be seen in many places. But after reading Matt's reply, it struck me that you could use ready-made foam insulation for heating / hot-water pipes and push this over the spars and oars to prevent them damaging the boat as it is towed on a trailer. The foam insulation sleeves are sold in various diameters here in Germany in DIY stores and ar ever popular for other purposes such as cushioning roof racks when you transport delicate objects etc.
Must fix up the direct contact between users function... You could contact CaptainNobody (aka Mirror62188SweetPea on YouTube), as he has just trailored SweetPea from California to Texas and back - roads in the USA are not all perfect.
Cheers,
Gernot H.
sweetpea on trailer

beermatt's picture

I know the things you mean, I've used them for plumbing in the past. Good idea I'll look out for them next time I'm at B&Q (hardware/DIY chain over here).

thanks for tips on towing, my boat is rather old its number is somewhere in the 8000's and I think that the wood is old and not as forgiving as perhaps it was once was contributes to it not liking being bumped around. I manage to get all the spars and other bits and bobs in the car, its more the lack of give on the trailer ( combi unit from trident dinghy uk) that causes bother. Was sailing today and no new bits fell off so that is good!
cheers david

I have an old dinghy trailer, an eBay bargain, which has coil springs and leading link suspension. Comparing it with the modern type using Indespension type units, it has very soft springing and quite a long travel. It makes me wonder whether modern trailers are just too hard-sprung for these old boats.

I replaced the old rusty indespension units on my trailer with 350kg rated new units as I want to use the trailer for another much heavier dinghy that I have. The result is far to hard for the Mirror so I am planning to build a new flat bed trailer with softer suspension and will transport the Mirror upside down. This will avoid the danger of damage below the waterline and will mean that my boat won't fill with water when it rains.