Building a Mirror - Question 4 (last)

The last question we have: where do these parts go?
They are for the front shoot.

See https://www.motionmountain.net/IMAGES/frontshoot.jpg

Where exactly do they go?

Can I mount them on the outer broder?
I am worried to mount them on the tanks one sits on, because the tanks seem so weak ...

Again thank you for all the answers - past and future!

PuffinInTegel's picture

Die Leitösen sollten so positioniert werden, dass die Fock bei festgezogener Schot sauber und ohne "Bauch" sitzt. Die Klemmen dort, wo sie gut zu bedienen sind (das hängt auch davon ab, ob man hauptsächlich Einhand oder mit Vorschoter segeln will).
Bei den modernen Fockschnitten werden diese Teile auf der Ducht montiert, um möglichst hoch am Wind segeln zu können. Ursprünglich und bis in die 70er Jahre waren sie auf dem Dollbord montiert. Die Ur-Version der Mirror-Jolle hatte nur hölzerne Leitösen auf dem Dollbord und keine Klemmen. Da musste der/die Vorschoter/in eben Dauerarbeit leisten.
Bei meinem Boot waren ursprünglich die Ösen und Klemmen jeweils auf einem Alublech montiert, das auf dem Dollbord festgeschraubt war. Als ich bei Instandsetzungarbeiten einen Unfall hatte, nahm ich die Gelegenheit wahr, sie auf die Seitentanks zu setzen*. Leider fahre ich immer noch die Original-Fock und die sitzt nun nicht auf allen Kursen optimal, ich fahre allerdings keine Regatten, also macht das nicht zu viel aus.
Die entsprechende Regel lautet:
1.7.3 There shall be not more than one port and one starboard jib sheet fairlead the position of which shall not be adjustable. Roller fairleads are not permitted. Jib sheet jam cleats may be fitted. The fairleads and associated jam cleats shall be fitted either on the gunwales, the top of the decking or the top of the thwart. If mounting blocks are used they shall be not more than 25mm thick nor more than 150mm in length or breadth and shall not overhang the deck edge or thwart. If backing plates are used, the size is optional, but they shall only be used for their intended purpose.

Die kursive Hervorhebung habe ich hinzugetan, um die drei Möglichkeiten klar zu machen.

* Beschrieben auf den Seiten 6 und 7 von https://mirrordiscussforum.org/documents/stories/JF2011.pdf .